FCD30 Position 3 Granite Finishing Tool
The FCD30 tool executes the finishing phase on the granite. This phase plays a vital role in the slab’s working process and is important to obtainingan excellent final result since it is the bridge between the grinding process and the polishing process.
The FCD30 Position 3 for granite has a steel core with high tolerance. the extra-fine abrasive diamond powderis laid through a an electroplating process at high density. This results in a granite finishing tool with extreme stiffness and an excellent finishing of the profile, preparing it for the polishing phase of the process.
The following features of the FCD30 tools are as follows:
- Finishing of the Profile Geometry
- Perfect Finishing of the Profile
- Optimization for the Polishing Phase
The following tables provide you with the measurements of the FCD30 Granite Finishing wheel and the specification of the granite profiling wheels wheels respectively.
|Position||Stock Removal||Rotating Speed||Feed Rate mm/min||Feed Rate inch/min|
|0G||0||5500 RPM||800-4000 mm/min||32-160 inch/min|
|5500 RPM||800-5000 mm/min||32-200 inch/min|
|2MG||0.019 inch (0.5 mm)||5500 RPM||800-4000 mm/min||32-200 inch/min|
|EXC3||0.011 inch (0.3 mm)||5500 RPM||800-5000 mm/min||32-200 inch/min|
|4||0.003 inch (0.1 mm)||3000 RPM||600-5000 mm/min||24-200 inch/min|
|5||0.003 inch (0.1 mm)||3000 RPM||600-5000 mm/min||24-200 inch/min|
|6||0.0019 inch (0.05 mm)||3000 RPM||600-5000 mm/min||24-200 inch/min|