D 40 Position 2 Granite Profiling Wheel

Smoothing Profiling Tool for Granite – D40 Position 2

This CNC tool executes the granite smoothing by removing the slab’s roughness. Additionally, the D40 profiling tools for granite maintains the the geometry of the profile even on very hard materials such as granite. This result is due to the use of materials such as the steel core of the D40 Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.

Main Characteristics

The characteristics of the D40 for smoothing granite are:

  • Perfect Profile Geometry
  • Long Life Abrasive Power
  • Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the D40 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.

D40 Specifications
Max D 136mm D40 Edge Profile
Min D 60mm
Height 50mm
Rad 13.5mm
Bore 35mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G 0 5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min