A30SR5 1/2 Gas Position 3

A30SR5 Position 3 Granite Finishing Tool

The A30SR5 tool executes the finishing phase on the granite. This phase plays a vital role in the slab’s working process and is important to obtainingan excellent final result since it is the bridge between the grinding process and the polishing process.

The A30SR5 Position 3 for granite has a steel core with high tolerance. the extra-fine abrasive diamond powderis laid through a an electroplating process at high density. This results in a granite finishing tool with extreme stiffness and an excellent finishing of the profile, preparing it for the polishing phase of the process.

Main Characteristics

The following features of the A30SR5 tools are as follows:

  • Finishing of the Profile Geometry
  • Perfect Finishing of the Profile
  • Optimization for the Polishing Phase

The following tables provide you with the measurements of the A30SR5 Granite Finishing wheel and the specification of the granite profiling bits respectively.

A30SR5 Specifications
Max D 34mm A 30 SR5 Oma 1/2 gas metal
Min D 20mm
Rad 5mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G 0 5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min