A30SR5 1/2 Gas Position 2

Smoothing Profiling Tool for Marble/Granite – A30SR5 Position 2

This CNC tool executes the marble/granite smoothing by removing the slab’s roughness. Additionally, the A30SR5 profiling tools for marble/granite work on very hard materials such as granite or engineered stone. This result is due to the use of materials such as the steel core of the A30SR5 Marble/Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.

Main Characteristics

The characteristics of the A30SR5 for smoothing marble/granite are:

  • Perfect Profile Geometry
  • Long Life Abrasive Power
  • Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the A30SR5 Marble/Granite Smoothing bit and the specification of the marble/granite profiling bits respectively.

A30SR5 Specifications
Max D 34mm A 30 SR5 Oma 1/2 gas metal
Min D 20mm
Rad 5mm
Marble/Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G 0 5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min