2G20R10 Position 3 Finishing Wheel

2G20R10 Position 3 Stone Finishing Tool

The 2G20R10 is a 2G20 Edge Profile tool with 10mm radius that executes the finishing phase on natural and engineered stone. This phase plays a vital role in the slab’s working process and is important to obtaining an excellent final result since it is the bridge between the grinding process and the polishing process.

The 2G20R10 Position 3 for natural and engineered stone materials has a steel core with high tolerance. the extra-fine abrasive diamond powder is laid through a an electroplating process at high density. This results in a natural and engineered stone finishing tool with extreme stiffness and an excellent finishing of the profile, preparing it for the polishing phase of the process.

Main Characteristics

The following features of the 2G20R10 tools are as follows:

  • Finishing of the Profile Geometry
  • Perfect Finishing of the Profile
  • Optimization for the Polishing Phase

The following tables provide you with the measurements of the 2G20R10 Granite Finishing wheel and the specification of the granite profiling wheels wheels respectively.

2G20R10 Specifications
Max D 104mm 2G20R10 Position 3
Min D 60mm
Height 42mm
Rad 10mm
Bore 35mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G 0 5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min