2G20R10 Position 2 Smoothing Wheel

Smoothing Profiling Tool for Granite – 2G20R10 Position 2

This CNC tool is a 2G20 Edge Profiler with a 10mm radius that executes the stone smoothing by removing the slab’s roughness. Additionally, the 2G20R10 profiling tools for natural and engineered stone maintains the the geometry of the profile even on very hard materials such as granite, quartz and quartzite. This result is due to the use of materials such as the steel core of the 2G20R10 Position 2 Stone Smoothing tool. The electrolytic process that is used to to lay the diamond powder also contributes to the results of the tool. It is very important that this tool is used before passing to the rectifying phase of processing the stone.

Main Characteristics

The characteristics of the 2G20R10 for smoothing granite are:

  • Perfect Profile Geometry
  • Long Life Abrasive Power
  • Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the 2G20R10 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.

2G20R10 Specifications
Max D 104mm 2G20R10 Position 2
Min D 60mm
Height 42mm
Rad 10mm
Bore 35mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G 0 5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min